A wind breaker is a vertically moving glass barrier designed to cut the wind in open areas. Thanks to the built-in locking gas-piston mechanism (Code: TA04.04.00.04), the upper glass panel is lightly pressed and smoothly raised or lowered.

Our systems standardly use 6mm Tempered Rounded-Edge Şişecam safety glass with high impact resistance.

No. When the 1.5mm galvanized steel planter body (Code: TA95.00.50.42) is filled with soil, flowers, or decorative stones, it gives the system a high center-of-mass weight. Locking the braked plate castors (Code: TA95.00.50.43) also prevents tipping even in stormy weather.

Our special locking, stainless gas pistons are heavy-duty mechanisms tested through thousands of open-close cycles. They operate trouble-free for years without wear.

Since wind breaker systems do not form a fixed reinforced-concrete structure and are classed as movable furniture on locking castors, they don't run into zoning permit obstacles with local authorities.

While closed, the system acts as a fixed handrail at an average height of 110 cm; once the piston is extended, the total height reaches 180 cm, fully cutting wind at head level.

Our profiles are manufactured from 6063 T6 architectural extrusion aluminum. The T.2479 Fixed Post (2.718 kg/m), T.2481 Fixed Horizontal (1.472 kg/m), and T.2480 Moving Post (1.459 kg/m) have heavy wall thicknesses.

No. Real Marine Series Qualicoat powder-coated aluminum profiles, M8 stainless fiber-reinforced nuts, inox screws, and galvanized-coated planter hardware are corrosion-guaranteed against sea-salt humidity.

When you lightly touch the top rail of the glass to release the lock, the internal gas piston effortlessly pushes the glass upward on its own. To close it, the glass is pressed back down until it locks.

Yes. Thanks to special joint interface profiles and steel connecting elements, you can cover any length of coastline or terrace frontage seamlessly with side-by-side modules.

Yes. The 1.5mm colored electrostatic powder-coated galvanized planter body has water drainage holes. Live ivy, tulips, dwarf pines, or artificial decorative plants can be grown comfortably.

The system is primarily designed to block wind and blown spray. Bristle strips and an EPDM gasket structure between panels block about 90% of rain passage.

Anthracite gray (RAL 7016), black (RAL 9005), and matte anodized are our standard colors. On request, any RAL powder-coat color matching your building's or café's concept can be applied.

Modules are pre-assembled and piston-adjusted at our factory before shipping; on-site installation typically takes between 1 and 3 hours, depending on the number of modules.

The tempered Şişecam glass we use breaks, if it ever does, into small, non-sharp granular pieces, preventing injury risk to customers or family members in the open area.

Plastic moving sliders and bristle-strip gaskets located in the heavy-duty aluminum post channels prevent the glass wings from moving or making noise in the wind.

Yes. Thanks to its modular, knock-down structure, the bolts can be removed and the unit stored at the end of the season, or castor-equipped models can be wheeled into any enclosed space you like.

Prices are calculated per module based on the selected base type (Fixed Steel Foot vs. Galvanized Planter), castor mechanism, glass square footage, and color group.

The professional Soudal 40FC polyurethane mastic (Code: TA40.01.09.05) we use at system joints dampens vibration, provides watertight sealing, and prevents shock from outdoor flexing.

Our wind breaker systems carry a full 2-year warranty against manufacturing and installation defects. Gas pistons carry a 5-year, and stainless aluminum profiles a 10-year, parts warranty.